Matthew Fero, 4/5/06
RNA
gel electrophoresis
(see Molecular Cloning 7.21-7.34)
(see Molecular Cloning 7.21-7.34)
Materials
DEPC H2O
1x Reaction buffer (per sample)
Procedure
DEPC H2O
DEPC 0.1% (v/v)
q.s. de-ioinized H2O
37ºC x1 hr, or r.t. overnight
Autoclave.
(NaOAc, EDTA and ethidium bromide solutions should also be DEPC treated.
Tris has a reactive amine and can't be DEPC treated)
10x Formaldehyde gel loading buffer: q.s. de-ioinized H2O
37ºC x1 hr, or r.t. overnight
Autoclave.
(NaOAc, EDTA and ethidium bromide solutions should also be DEPC treated.
Tris has a reactive amine and can't be DEPC treated)
50% glycerol
10 mM EDTA, pH8
0.25% bromphenol blue
0.25% xylene cyanol
10x MOPS buffer (1L)10 mM EDTA, pH8
0.25% bromphenol blue
0.25% xylene cyanol
41.8 g MOPS (0.2M) in DEPC H2O,
pH7
20 mL 1 M NaOAC (DEPC treated) (final 20 mM)
20 mL 0.5M EDTA, pH8 (DEPC treated) (final 10 mM)
q.s. 1L DEPC H2O
Sterile filter, store at 4ºC in dark. (Don't use if dark yellow)
20 mL 1 M NaOAC (DEPC treated) (final 20 mM)
20 mL 0.5M EDTA, pH8 (DEPC treated) (final 10 mM)
q.s. 1L DEPC H2O
Sterile filter, store at 4ºC in dark. (Don't use if dark yellow)
1x Reaction buffer (per sample)
2 µL 10x MOPS buffer (final 1x)
4 µL formaldehyde (final 20%)
10 µL formamide (final 50%)
2 µL 0.2 mg/mL ethidium bromide, DEPC treated (final 10 µg/mL)
1.5% Agarose 2.2M formaldehyde gel 4 µL formaldehyde (final 20%)
10 µL formamide (final 50%)
2 µL 0.2 mg/mL ethidium bromide, DEPC treated (final 10 µg/mL)
1.5 g agarose
72 mL H2O
Dissolve in microwave and then cool to 55ºC
In a fume hood add:
10 mL 10x MOPS buffer
18 mL de-ionized formaldehyde
Cast gel and wrap in Saran wrap until ready to use.
Note: Northern blots require
formadehyde in the gel. For simple inspection,
however, it is fine to use regular DNA-style TBE agarose gels. In
either case, the RNA should initially be denatured (steps 2-3) and
RNAse free reagents should be used.
72 mL H2O
Dissolve in microwave and then cool to 55ºC
In a fume hood add:
10 mL 10x MOPS buffer
18 mL de-ionized formaldehyde
Cast gel and wrap in Saran wrap until ready to use.
- Add 2 µL RNA (up to 20 µg) to 18 µL 1x Reaction Buffer. Incubate at 55ºC x1 hr, or 85ºC x 10 min. Cool in ice and spin quickly to pull condensation down off of cap.
- Add 2 µL 10x Formaldehyde gel loading buffer.
- Load on agarose gel. Use formaldehyde agarose gels and 1x
MOPS running buffer if doing a Northern or if accurate sizes are
necessary. Otherwise 0.5x TBE gels are fine. Rinse gel box
in DEPC H2O prior to use. Use RNA standards.
- Run at 4-5 V/cm for 4 hrs. Place on Saran wrap prior to
photographing
